American Commercial Hot Water Heaters

American Commercial Gas Water Heaters


Non-Dampered Standard	Flue Damper, Spark Ignition, Heavy Duty - 125 to 505 MBtu's	Polaris® High Efficiency	Powerflex® Power Vent

Non-Dampered Standard

American has an array of standard non-dampered models with a variety of tank and BTU inputs using natural gas or propane.

• 2" Non-CFC Polyurethane Foam to prevent heat loss & reduce energy costs

• Fused Ceramic Shield Tank for anti-corrosion protection o Factory Installed Side Temperature & Pressure Valve

• 3/4" Side and Top connections

• Anode Rod

• Extra Heavy Duty Anode Rod

• Tested and listed with CSA International in accordance with the latest addition of ANSI Z21.10.1 or .3 CSA 4.1 or 4.3, for up to 180°F as an automatic storage heater.

• California (CEC) and New York energy requirements met or exceeded

Product Specs

TOP

Flue Damper, Spark Ignition, Heavy Duty - 125 to 505 MBtu's

American's tried and trusted heavy-duty commercial models include an electronic thermister sensor and motorized flue damper for high-powered performance.

Ideal for most medium to heavy duty commercial applications requiring a motorized flue damper.

• Motorized flue damper

• Non-CFC Polyurethane Foam to prevent heat loss & reduce energy costs

• Fused Ceramic Shield Tank for anti-corrosion protection

• 24-Volt Thermostat Control

• Electronic Thermister Sensor

• Power cord

• Factory-Installed Temperature & Relief Valve

• Multiple anode rod

• 4" Diameter Hand Hole Cleanout

• Tested and listed with CSA International in accordance with the latest addition of ANSI Z21.10.1 or .3 CSA 4.3 for up to 180°F, as an automatic storage heater. ASHRAE Standard 90.1 1989 addendum 90.1 b. California (CEC) and New York energy requirements met or exceeded. *ASME Models

Product Specs

TOP

Polaris® High-Efficiency

The world's most efficient gas water heater, Polaris® offers 95-96% thermal recovery efficiency and electronic diagnostics. This model is ideal for fast food restaurants requiring rapid recovery of hot water, but with a small footprint.

An exceptional choice for business applications, such as food service, where lots of hot water is needed.

• 95-96% Thermal Efficiency

• Stainless Steel Tank and Combustion Chamber/Flue

• Sealed Combustion

• Vents (Intake and Exhaust) with 3" PVC ABS or CPVC Schedule 40 Plastic Pipe

• 2" Non-CFC Polyurethane Foam to prevent heat loss & reduce energy costs

• Factory-Installed Temperature & Pressure Relief Valve

• LED Operational and Diagnostic Lights

• Negative-Pressure Gas Valve

• Electronic Hot Surface Ignition

• 24-Volt Thermostat Control

• Tested and listed with CSA International in accordance with the latest addition of ANSI Z21.10.3 CSA 4.3

• ASHRAE Standard 90.1-1999 - thermal efficiency requirements are met or exceeded. Zero clearance to combustibles

Product Specs

TOP

Powerflex® Power Vent

A built-in blower allows through-the-wall or through-the roof venting up to 40' using 3" schedule 40 PVC pipe. Ideal for customers in high rises or conversion from an electric to gas water heater.

• Power Blower - vents up to 40' using 3" schedule 40 PVC pipe

• Self-Cleaning LimeFighter® Dip Tube to prevent tank corrosion

• 2" Non-CFC Polyurethane Foam to prevent heat loss & reduce energy costs

• Fused Ceramic Shield Tank for anti-corrosion protection

• Factory Installed Side Temperature & Pressure Valve

• Aluminized Steel Multi-Port Burner on long life in natural gas units. Cast iron burners for propane.

• Combination Thermostat/Energy Cut-Off

• Anode Rod

• Power Cord

• Propane Models with Cast Iron Burners and Lo-Nox Burner on Natural Gas Models

• Tested and listed with CSA International in accordance with the latest addition of ANSI Z21.10.1 or .3 CSA 4.1 or 4.3 for up to 180° F as an automatic storage heater in compliance with ANSI Z-21.10.1 or .3 requirements.

• California (CEC) and New York energy requirements met or exceeded.

Product Specs

TOP