 State
Commercial Gas Hot Water Heaters
Our most efficient water heater ever delivers higher
output with lower input. Features a 96% Thermal Efficiency that will save money on gas bills. When high-quality efficiency is what you’re looking for, the Ultra ForceTM will deliver it, year after year. Backed by the solid reputation of State, so you can expect the
best.
View Models:
TOP
| |
SUF Series - State's most efficient water
heater ever delivers higher output with lower
input. Features a 96% Thermal Efficiency that
will save money on gas bills. When high-quality
efficiency is what you’re looking for, the Ultra
ForceTM will deliver it, year after year. Backed
by the solid reputation of State, so you can expect
the best.
Delivers higher output with lower input
| • |
Features an amazing thermal efficiency up to 96% |
| • |
Meets ASHRAE/IESNA 90.1 1999 standards for standby loss and recovery efficiency |
| • |
Low-NOx emissions - all models comply with SCAQMD Rule 1146.2 |
Engineered to be completely reliable
| • |
Sealed power direct-vent, sidewall or vertical, draws all combustion air from outside |
| • |
Combustion air blower, all controls and gas valves located on top of unit for protection against high water |
| • |
ASME tank construction available on all models |
| • |
3-year limited tank warranty |
|
 |
TOP
| |
90 Series - The 50-gallon, 76,000 BTU
Force 90 light-duty commercial gas water heater
is equipped with a fully submerged, spiral-shaped
condensing heat exchanger. This design provides
much greater heat transfer surface than a standard
straight flue tube, resulting in 90% thermal efficiency
and higher hot water output than comparable 80%
efficient water heaters. With 22" diameter, the
50-gallon Force 90 can be installed in less space
than a 75-gallon unit and delivers greater recovery
and lower operating cost.
Power-Vent Design for
Installation Versatility
| • |
Intelli-Vent®* Gas Control with Silicon Nitride Hot Surface Ignitor |
| • |
Glass Lined Tank with Two Magnesium Anode Rods |
| • |
Intelli-Vent®* Gas Control with Silicon Nitride Hot Surface Ignitor |
Side-Mounted Taps for Recirculating Systems
| • |
Low-NOx Green Choice® Burner |
| • |
PEXAN™ Diffuser Dip Tube |
| • |
Factory-Installed Temperature and Pressure Relief Valve |
| • |
Maximum Hydrostatic Working Pressure: 150 psi |
| • |
Meets ASHRAE/IESNA 90.1-1999 |
|
 |
TOP
|
Self-Cleaning Sandblaster®
|
The first self-cleaning water heater is still the best, with improvements that really make a difference. The Sandblaster® line of commercial gas water heaters feature unique Hydro-Cannon™ technology to keep sediment from settling in the tank, thus keeping it extremely energy efficient at all times. Durable, flexible, and virtually trouble-free. A great long-term investment that will save money, time, and hassles.
View Models:
TOP
| |
Light Duty & Automatic with Flue Damper
|
| |
The Sandblaster® line of commercial gas water heaters feature unique Hydro-Cannon™ technology to keep sediment from settling in the tank, thus keeping it extremely energy efficient at all times.
Re-engineered to be even better
| • |
Our unique Hydro CannonTM technology blasts sediment away and keeps it efficient |
| • |
Multiple anode rods with stainless steel cores for longer life |
| • |
Meets NSF requirements when equipped with optional leg kit |
Convenient flexibility
| • |
Can be installed as single unit or in manifolded multiples, with or without storage tanks |
| • |
Front, top or rear water connection options |
| • |
Low-profile design |
| • |
Thermostat dual controller reduces thermal stacking inside tank |
Energy Efficient
| • |
Energy-saving automatic flue damper on SBD Series with 360° rotation service switch |
| • |
80% thermal efficiency - meets ASHRAE/IESNA 90.1-1999 |
| • |
3-year limited tank warranty |
|
 |
TOP
| |
SBN Series - Induced Draft / Low-NOx Gas
|
| |
Re-engineered to be even better
| • |
Built-in induced draft blower produces power-induced draft of make-up air prior to burner ignition to help assure peak performance |
| • |
Low-NOx burner meets SCAQMD Rule 1146.2 |
| • |
Thermostat dual controller reduces thermal stacking inside tank |
| • |
Intermittent electronic ignition eliminates pilot |
| • |
ASME tank construction available on 199,000 through 390,000 BTU models |
| • |
Multiple anode rods with stainless steel core for longer life |
| • |
80% thermal efficiency - meets ASHRAE/IESNA 90.1-1999 |
Excellent flexibility
| • |
Can be installed as single unit or in manifolded multiples, with or without storage tanks |
| • |
Front, top or rear water connection options for added flexibility |
| • |
Convenient low-profile design, great for tight spaces |
| • |
3-year limited tank warranty |
|
 |
TOP
| |
SDV Series - Power Direct-Vent
|
| |
Self-cleaning efficiency
| • |
Newly engineered Hydro Cannon™ self-cleaning is better than ever |
| • |
Non-condensing, up to 85% thermal efficiency |
| • |
SDX models have low-NOx burners that comply with SCAQMD Rule 1146.2 |
Convenient Options
| • |
Installs with 3", 4" or 6" Schedule 40 PVC pipe |
| • |
Ask about sizes |
| • |
3-year limited tank warranty |
|
 |
TOP
Rugged dependability is what makes the Titan™ series so popular. With the kind of quality that only State can deliver, you can rest easy. There’s a model for just about every use. Choose from natural gas, propane gas, or oil. Ideal for all sorts of high-demand installations. Whatever model you choose, it will pay off with years of trouble-free service.
View Models:
TOP
| |
GPG Series - Natural or Propane Gas
|
| |
High performance for high demand
| • |
Precise, powered-burner performance |
| • |
Barometric vent damper ensures proper draft for maximum efficiency |
| • |
Mounted on rugged channel iron skids for ease of handling |
Extremely Safe
| • |
UL-listed powered gas burner with electronic flame monitoring, direct-spark ignition, redundant gas valves |
| • |
Fully automatic controls, including safety shut-off, high temperature limit control, dual adjustable thermostats |
| • |
ASME tank construction available on all models |
| • |
Two tank inspection ports |
| • |
3 year limited tank warranty |
|
 |
TOP
| |
GP0 Series - Titan™ Oil Powered Burner
|
| |
Improved Energy Efficiency
| • |
Features two layers of high temperature ceramic fiber insulation in combustion chamber |
| • |
Engineered for insulating effectiveness and stability of flame pattern |
| • |
Meets ASHRAE/IESNA 90.1-1999 standards |
| • |
Interrupted ignition reduces electricity consumption |
Built-In Reliability
| • |
ASME tank construction available on models with 315,000 BTU input or higher |
| • |
Mounted on rugged channel iron skids for ease of handling |
| • |
3 year limited tank warranty |
|
 |
TOP
| |
Titan™ LV Large Volume Powered Burner
|
| |
TPG Series - Natural or Propane Gas
TPO Series - Oil
TPD Series - Gas/Oil Dual Fuel
TPX Series - Low-NOx Gas
Convenient Installation
| • |
Mounted on rugged channel iron skids for ease of handling |
| • |
Rated as Category 1 appliances, can be commonly vented with other Category 1 appliances |
| • |
Automatic gas valves |
| • |
Ask about the sizes and footprints |
Safe and reliabe
| • |
UL-listed powered gas burner with electronic flame safeguard controls |
| • |
ASME tank construction on all models |
| • |
Low-water cutoff helps prevent dry-firing |
| • |
Two tank inspection ports |
| • |
Combination temperature and pressure gauge |
| • |
3 year limited tank warranty |
|
 |
TOP
|
